2" Prime Faux Wood Blinds

*Width

-- Please Select --12131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596

*Width Decimal

-- Please Select --0/01/81/43/81/25/83/47/8

Width

Close

Please enter your desired width here to an 1/8 of an inch. If your size is exactly at a given inch please select 0/0 for the width's fraction.

Here are some tips on measuring your window's width...

For Inside Mount

Measure the width of the window opening in 3 places (top, middle, and bottom). Take the smallest of the 3 measurements (rounded to the nearest 1/8 inch) and write it down. This is the width you will order. Do not make any deductions! The factory will make any necessary deductions.

For Outside Mount:

 Measure the width of the window opening from left to right and add 4"to 6" for maximum light gap coverage and privacy. If the shade is to be mounted to trim or framing around the window measure from the trim's outside edge left to right. Keep in mind that on roller shades the factory will NOT make deductions from your measurements on both the barrel and fabric. Once you determine the desired width (rounded to the nearest 1/8 inch) write it down.

*Height

-- Please Select --12131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138

*Height Decimal

-- Please Select --0/01/81/43/81/25/83/47/8

Height

Close

Please enter your desired height here to an 1/8 of an inch. If your size is exactly at a given inch please select 0/0 for the height's fraction.

Here are some tips on measuring your window's height

For Inside Mount

Measure the window opening height in 3 places (left, middle, right) but this time take the largest measurement (rounded to the nearest 1/8 inch). This is the height you will order. The factory will make no deductions or additions to the length measurement. NOTE: THIS DOES NOT APPLY TO VERTICAL BLINDS. FOR VERTICAL BLINDS, IT WOULD BE THE SMALLEST.

For Outside Mount

To determine the height measure the window opening from top to bottom and add 2" to 4" inches to this measurement to allow space for mounting brackets above the opening and enough overlap at the bottom to avoid a light gap. Once you determine the desired height (rounded to the nearest 1/8 inch) write it down. This is the height you will order.

The factory will not make deductions or additions to your measurement. If there is trim or framing around the window measure from the trim's outside edge top to bottom and this is the height you will order, provided the trim provides the flat space required for an outside mount. If not you can mount the blind to the wall above the trim. In addition if the windowsill protrudes outside the window opening at the bottom of the window measure just to the top of the sill.

*Color

-- Please Select --Smooth Bright WhiteSmooth Pearl WhiteSmooth Oyster WhiteSmooth BirchSmooth MapleSmooth NaturalEmbossed Bright WhiteEmbossed Pearl WhiteEmbossed Oyster WhiteEmbossed BirchEmbossed NaturalEmbossed MapleEmbossed CedarEmbossed CherryEmbossed MahoganyEmbossed WalnutEmbossed PecanEmbossed RedwoodEmbossed Rosewood

Color

Close

Please look below for the different color options available. If an exact color match is needed we recommend you order free samples below. 

*Control Side

-- Please Select --Tilt Left, Lift LeftTilt Left, Lift Right (Standard)Tilt Right, Lift LeftTilt Right, Lift Right

Control Side

Close

In this option, please choose if you would like your control(s) on the right hand side or the left hand side. We recommend choosing the side which is easiest to reach. 

*Mount

-- Please Select --Inside MountOutside Mount

Mount

Close

For Mount please select either Inside or Outside Mount. 

Inside Mount means that you will be installing your new blinds inside your window frame. 

Outside Mount means that you will be installing your new blinds outside your window frame, either on wall or ceiling. 

Here are some of our tips on how to measure...

Inside Mount

WIDTH: Measure the width of the window opening in 3 places (top, middle, and bottom). Take the smallest of the 3 measurements (rounded to the nearest 1/8 inch) and write it down. This is the width you will order. Do not make any deductions! The factory will make any necessary deductions.

HEIGHT: Measure the window opening height in 3 places (left, middle, right) but this time take the largest measurement (rounded to the nearest 1/8 inch). This is the height you will order. The factory will make no deductions or additions to the length measurement. NOTE: THIS DOES NOT APPLY TO VERTICAL BLINDS. FOR VERTICAL BLINDS, IT WOULD BE THE SMALLEST.

Outside Mount:

WIDTH: Measure the width of the window opening from left to right and add 4"to 6" for maximum light gap coverage and privacy. If the shade is to be mounted to trim or framing around the window measure from the trim's outside edge left to right. Keep in mind that on roller shades the factory will NOT make deductions from your measurements on both the barrel and fabric. Once you determine the desired width (rounded to the nearest 1/8 inch) write it down.

HEIGHT: To determine the height measure the window opening from top to bottom and add 2" to 4" inches to this measurement to allow space for mounting brackets above the opening and enough overlap at the bottom to avoid a light gap. Once you determine the desired height (rounded to the nearest 1/8 inch) write it down. This is the height you will order.

The factory will not make deductions or additions to your measurement for Outside Mounts, so order exactly the size you desire. 

ADD ONS

• Add Hold Down Brackets
  

  Add Hold Down Brackets

  Close

  Hold Down Brackets are normally used for blinds on doors so that your new blinds don't swing back and forth. Hold down brackets are not recommended otherwise. 

* Required Fields