Harmony Series

*Width

-- Please Select --1213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394

*Width Decimal

-- Please Select --0/01/81/43/81/25/83/47/8

Width

Close

Please enter your desired width here to an 1/8 of an inch. If your size is exactly at a given inch please select 0/0 for the width's fraction.

Here are some tips on measuring your window's width...

For Inside Mount

Measure the width of the window opening in 3 places (top, middle, and bottom). Take the smallest of the 3 measurements (rounded to the nearest 1/8 inch) and write it down. This is the width you will order. Do not make any deductions! The factory will make any necessary deductions.

For Outside Mount:

 Measure the width of the window opening from left to right and add 4"to 6" for maximum light gap coverage and privacy. If the shade is to be mounted to trim or framing around the window measure from the trim's outside edge left to right. Keep in mind that on roller shades the factory will NOT make deductions from your measurements on both the barrel and fabric. Once you determine the desired width (rounded to the nearest 1/8 inch) write it down.

*Height

-- Please Select --12131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144

*Height Decimal

-- Please Select --0/01/81/43/81/25/83/47/8

Height

Close

Please enter your desired height here to an 1/8 of an inch. If your size is exactly at a given inch please select 0/0 for the height's fraction.

Here are some tips on measuring your window's height

For Inside Mount

Measure the window opening height in 3 places (left, middle, right) but this time take the largest measurement (rounded to the nearest 1/8 inch). This is the height you will order. The factory will make no deductions or additions to the length measurement. NOTE: THIS DOES NOT APPLY TO VERTICAL BLINDS. FOR VERTICAL BLINDS, IT WOULD BE THE SMALLEST.

For Outside Mount

To determine the height measure the window opening from top to bottom and add 2" to 4" inches to this measurement to allow space for mounting brackets above the opening and enough overlap at the bottom to avoid a light gap. Once you determine the desired height (rounded to the nearest 1/8 inch) write it down. This is the height you will order.

The factory will not make deductions or additions to your measurement. If there is trim or framing around the window measure from the trim's outside edge top to bottom and this is the height you will order, provided the trim provides the flat space required for an outside mount. If not you can mount the blind to the wall above the trim. In addition if the windowsill protrudes outside the window opening at the bottom of the window measure just to the top of the sill.

*Color

-- Please Select --Natural WhiteGreyDessert Sand

Color

Close

Please look below for the different color options available. If an exact color match is needed we recommend you order free samples below. 

*Control Side

-- Please Select --LeftRight

Control Side

Close

In this option, please choose if you would like your control(s) on the right hand side or the left hand side. We recommend choosing the side which is easiest to reach. 

*Mount

-- Please Select --Inside MountOutside Mount

Mount

Close

For Mount please select either Inside or Outside Mount. 

Inside Mount means that you will be installing your new blinds inside your window frame. 

Outside Mount means that you will be installing your new blinds outside your window frame, either on wall or ceiling. 

Here are some of our tips on how to measure...

Inside Mount

WIDTH: Measure the width of the window opening in 3 places (top, middle, and bottom). Take the smallest of the 3 measurements (rounded to the nearest 1/8 inch) and write it down. This is the width you will order. Do not make any deductions! The factory will make any necessary deductions.

HEIGHT: Measure the window opening height in 3 places (left, middle, right) but this time take the largest measurement (rounded to the nearest 1/8 inch). This is the height you will order. The factory will make no deductions or additions to the length measurement. NOTE: THIS DOES NOT APPLY TO VERTICAL BLINDS. FOR VERTICAL BLINDS, IT WOULD BE THE SMALLEST.

Outside Mount:

WIDTH: Measure the width of the window opening from left to right and add 4"to 6" for maximum light gap coverage and privacy. If the shade is to be mounted to trim or framing around the window measure from the trim's outside edge left to right. Keep in mind that on roller shades the factory will NOT make deductions from your measurements on both the barrel and fabric. Once you determine the desired width (rounded to the nearest 1/8 inch) write it down.

HEIGHT: To determine the height measure the window opening from top to bottom and add 2" to 4" inches to this measurement to allow space for mounting brackets above the opening and enough overlap at the bottom to avoid a light gap. Once you determine the desired height (rounded to the nearest 1/8 inch) write it down. This is the height you will order.

The factory will not make deductions or additions to your measurement for Outside Mounts, so order exactly the size you desire. 

ADD ONS

• Add 3 Inch Round Cover With Fabric Insert +$45.00
  

  Add 3 Inch Round Cover With Fabric Insert

  Close

  A 3" Round Cover adds a very elegant look to your New Roller Shades. This Valance is made of Aluminum and is meant to cover the Roller Shades' control and tube. We will match the fabric inserted in this cover with the color you select in your order. 

  Here is a picture of the Cover on a Wood Look Roller Shade, Color Chocolate...

   

  

• Add 4 Inch Square Decorative Cover +$65.00
  

  Add 4 Inch Square Decorative Cover

  Close

  A 4" Square Cover is meant to hide the Roller Shades Controls and Tube while also preventing light gaps coming in from the top of the window. This Cover gives your shades a very distinct and clean look.

  Here is a picture of the Cover on a Solar Shade , Color Light Grey...

  

  

• Add Motorization With A Remote Control +$190.00
  

  Add Motorization With A Remote Control

  Close

  Upgrade to the ultimate in convenience with a motorized shade. With this option you will be able to control your new shades with a touch a button. Our motors come standard with a 6 channel control so you may control up to 6 shades at one time!

  Also included will be a wall mount for your remote control. If you need help deciding how many motors you will need, please give us a call.

  Here is a picture of the Modern Remote Control you will be receiving...

  

Chain Color

-- Please Select --WhiteIvoryIvoryGreyChocolateChocolateBlackNone- I have Added Motorization Option Above

Chain Color

Close

Please select what color you would like your chain to be. Usually shades are made with white controls and chain. 

Control Color

-- Please Select --WhiteBlackNone- I have Added Motorization Option Above

Control Color

Close

Please select what color you would like your control to be. Usually shades are made with white controls and chain. 

Bottom Option

-- Please Select --Decorative BottomrailInternal Bottom Bar

Bottom Option

Close

The Bottom Bar Is What Holds Down Your Shade. You Can Either Order An Internal Hem Bar Which Is Not Seen Or A Decorative Bottomrail. 

Roll Direction

-- Please Select --Reverse Roll DropStandard Drop

Roll Direction

Close

The Standard Roll Direction Drops Closer To Your Window's Glass. A Reverse Roll Drops Away From Your Window's Glass.

* Required Fields